|
Product Details:
|
| Part Number: | YN13E01299P1/P2，YN14E01082P1 | Applicable Model: | SK200-6E，SK230-6E，SK250-6E |
|---|---|---|---|
| Goods Status: | Brand New And Unused | Brand: | Kobelco Excavator |
| Post-sales Service: | Online Support | Packaging Type: | Independent Paper Packaging |
| Commercial Quality: | Superior Quality | Materials: | Pure Copper |
| High Light: | YN13E01299P1 Excavator Wiring Harness,KOBELCO Car Wiring Harness,Sk200-6e Whole Car Wiring Harness |
||
YN13E01299P1/P2 KOBELCO Excavator Sk200-6e Whole Car Wiring Harness, Wire Assembly
This product is Kobelco excavator accessories The whole vehicle wiring harness fittings Bridge beam body outer wiring harness 6 d34 mitsubishi engine wiring harness, suitable model SK200-6 e, SK230-6 e, SK250-6 e part number is YN13E01299P1/P2,YN14E01082P1, the product is produced by original model data, excavator wire harness for new and unused, each set of harness will pass strict inspection before delivery, so as to achieve products of high quality quantitative standards
| Applicable models | SK200-6E, SK230-6E, SK250-6E |
| part number | YN13E01299P1/P2,YN14E01082P1 |
| brand | Kobelco |
| range of application | Kobelco excavator |
| Goods status | Brand new and unused |
| materials | pure copper wires |
Warm Tips:
(Instructions for the installation of the whole vehicle wiring harness) Please confirm the good reinstallation after receiving the goods, wiring harness after installation and dirt are not after-sales.
Please also keep the floor clean and other paper clean and dry when checking, spread the line on it and check it clearly before installing.
Check the plug is correct and other power.
There is a small error between the negative factory line and the original line. The electrician can try to solve it by himself.
Check the error please timely feedback information to contact good salesman
Tel: 15112670997
